Remote Control - Sharp CD-DV650W Operation Manual

Remote control

CD-DV650W
CD-DV850W
ENGLISH
Battery installation
H
1 Open the battery cover.
2 Insert the batteries according to the direction indicated in the
battery compartment.
When inserting or removing the batteries, push them towards the
d battery terminal.
3 Replace the cover.
Precautions for battery use:
I Replace all old batteries with new ones at the same time.
I Do not mix old and new batteries.
I Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
I Do not use rechargeable batteries (nickel-cadmium battery, etc.).
I Installing the batteries incorrectly may cause the unit to malfunction.
I Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
E-15
Notes concerning use:
I Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
I Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
I Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
I Keep the remote control away from moisture, heat, shock and
vibrations.
Test of the remote control
H
Check the remote control after checking all the connections have been
made correctly. (See pages 10 - 14).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
0.2 m - 6 m
(8" - 20')
Remote sensor
DVD MINI SYSTEM
CD-DV650
1 MIC 2 MIC LEVEL
MIN MAX