Teletext Language Setting - Sharp AQUOS LC-37HV4M Operation Manual

Useful features
Picture and still image
You can display two same-sized pictures – one moving
and one still – when inputting from an AV source.
1
Press d.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press d.
2
Update the still image by pressing ENTER.
• Each time you press ENTER, the image on the
right screen updates.
3
Press d to exit still image.
NOTE
• This function does not work in PC input mode.
• When this function is not available, "No still image display
available." will display.
• The still image automatically goes out after 30 minutes.
62

Teletext language setting

If Teletext information does not display correctly,
perform the setting procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
1
2
3
4
FREEZE
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
Press MENU and the TV MENU screen
displays.
Press c/d to select "Setup".
• If password is already set, you are asked to
enter it. Follow the same steps as explained in
"Auto installation". (See steps 2 and 3 on page
22.)
Press a/b to select "Text Lang.", and then
press ENTER.
Press a/b to select the receivable teletext
broadcasting language in your country.
TV MENU
Setup
Text Lang.
West Europe
East Europe
Greek/Turkish
Cyrillic
• West Europe - English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe - Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish - English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic - English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish