Wide Mode (For Av Input Mode) - Sharp AQUOS LC-37HV4M Operation Manual

Useful adjustment settings
4:3 Mode set to "Normal"
Selected item
For 4:3 "standard" pictures. A side bar appears on each side.
Normal
For 14:9 squeeze pictures. A thin side bar appears on each side.
Full 14:9
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on
Zoom 14:9
the top and bottom with some programmes.
In this mode the picture is progressively stretched toward each side of the screen.
Panorama
For 16:9 squeeze pictures.
Full
For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 16:9
For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9
Normal
Cinema 14:9
WIDE MODE
Normal
Full 14:9
Zoom 14:9
Panorama
Full
Cinema 16:9
Cinema 14:9
4:3 Mode set to "Panorama"
Full 14:9
Cinema 16:9

WIDE mode (for AV input mode)

Manual Selection
1
Press f.
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
2
Press f or a/b while the WIDE MODE
menu displays on the screen.
• As you toggle down the options, each is
immediately reflected on the Display. No need
to press ENTER.
Auto Selection
If you set "WSS" and "4:3 Mode" in the Setup menu on
page 56, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
"WSS" menu
To enable Auto Selection, set "WSS" in the Setup menu
to "On". (See page 56.)
"4:3 Mode" menu
To set the type of the wide screen, select "Normal" or
"Panorama" in the 4:3 Mode menu. (See page 56.)
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Description
Zoom 14:9
Full
Panorama
53