NETGEAR Wireless-N User Manual page 89

You can also type \\readyshare in the address field of your Web browser.
Note: If you logged in to the modem router before you connected your USB device, you
might not see your USB device in the modem router screens until you log out and
then log back in again.
The following table explains the fields and buttons in this screen.
Table 5-1. USB Storage Basic Settings
Fields and Buttons
Network Device Name
Available Network Folder Name
folders
Volume name
Total/Free Space
Share Name
Read/Write Access
Edit button
Safely Remove USB Device button
USB Storage
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
v1.0, January 2010
Description
The default is \\readyshare. This is the name used to
access the USB device connected to the modem router.
Full path of the used by the Network Folder.
Volume name from the storage device (either USB drive
or HDD).
Shows the current utilization of the storage device.
• You can click the name shown or you can type it in the
address field of your Web browser.
• If Not Shared is shown then the default share has been
deleted and no other share for the root folder exists.
Click the link to change this setting.
• Shows the permissions/access controls on the network
folder:
• All -no password allows all users to access the network
folder.
• admin uses the same password that you use to log in to
the modem router main menu.
You can click the Edit button to edit the Available
Network folder settings. See
on page 5-7.
Click to safely remove the USB device attached to your
modem router. See "Unmounting a USB Drive" on
page 5-11.
"Editing a Network Folder"
5-6