Tape Operation ( And ) - Panasonic PV-D4762K Operating Instructions Manual

Tape Operation
detects and marks the
beginning and end points of commercials on your tape
for recordings over 15 minutes in length.
When
back, the VCR automatically advances through the
commercial segments at high speed. You can also set
this feature to Manual so as to have more control over
the advance process. The effectiveness of this system
can vary due to differences in the way television stations
broadcast. See page 32 for answers to the most
commonly asked questions about this feature.
When C/A RECORD: ON, VCR automatically rewinds
the tape after a recording has been made and marks the
beginning and end of any detected commercial blocks.
After marking is done, the tape is returned to the end of
recording. Commercials are not erased from the tape.
1 Press ACTION*
to display MENU.
2
MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL
SET UP COMMERC I AL ADV.
IDIOMA/LANGUE : ENGL I SH
VCR'S OUTPUT CH:3
SELECT :
SET:SET
EXIT : ACTION
3
SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO
SELECT : SET : SET
EXIT : ACT I ON
ON Timer Recording and One Touch recordings are marked automatically.
THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.
MARKING
NOW : PRESS 1
LATER : PRESS 2
CANCEL : PRESS ACTION
OFF The VCR will not mark commercials.
When you are editing or dubbing a tape, or when you do not wish to use this feature,
OFF should be selected.
4 Press ACTION twice
to return to normal screen.
30
marked tape is played
Marking
Press
to select "SET UP
COMMERCIAL ADV.,"
and press SET to
display.
Press
• When using the timer to record two
to select "C/A RECORD,"
and press SET to set
"ON" or "OFF".
When STOP is pressed during normal recording, Select One of a)
or b) or c).
a) Press 1 key to mark the recording now.
"NOW MARKING COMMERCIALS" appears.
b) Press 2 key to mark the recording later (after the power has
been turned off).
• If the tape is rewound and another recording started before the
power is turned off, commercials may not be marked correctly.
c) Press ACTION to cancel the marking of this recording.
Ready Checklist
All connections are made.
One time Setup completed.
VCR is plugged in.
TV is turned on and set to CH3, 4
or Video on TV.
NUMBER
keys
ACTION
SELECT
SET
Note
adjacent shows on the same
channel, better accuracy can be
obtained by programming each
show separately.