Panasonic SC-AK640 Operating Instructions Manual page 8

Discs (Continued)
Changing multiple discs (MULTI CHANGE) Changing multiple discs (MULTI CHANGE)
By main unit only
1 Press [0, MULTI CHANGE] to open the trays.
2 Press the button repeatedly to check and change
multiple discs.
Note:
• The tray with a disc being played will not open.
• If the player is stopped, all trays will open. To close the remaining
trays simultaneously, press [0, OPEN/CLOSE].
Changing a single disc (SINGLE CHANGE) Changing a single disc (SINGLE CHANGE)
By main unit only
While one disc is playing, you can change the discs in other
trays.
1 Press [0, SINGLE CHANGE].
Press [1 3 ~ 5 3] to select the desired tray.
2
Change the disc.
3
Press [0, SINGLE CHANGE] again to close the tray.
4
C C hecking the track information hecking the track information
You can select a desired disc display mode.
Press [DISPLAY] during play or pause.
Elapsed play time
Elapsed
➞
play time
➞
Tag (Artist) Tag (Track)
8
RQT8043
Numeric
buttons
Remaining play time
Remaining
➞
Album Name
play time
➞ ➞
Tag (Album) Track Name
Note:
• When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
• When a title is longer than 9 characters, it will scroll across the
display. The scrolling will start after every 3 seconds.
• "NO TAG" is displayed if titles with tags have not been entered.
• Maximum number of displayable characters: approximately 32
• This unit can display album, track and artist name with WMA tags
and MP3 ID3 tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support cannot be
displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced play Advanced play
Program play Program play
This function allows you to program up to 24 tracks.
Press [6, CD] and then [7, CLEAR].
1
Press [PROGRAM].
2
"PGM" appears.
3 Press [DISC] and then [1] ~ [5] to select the disc.
Press the numeric buttons to select your desired
4
track.
Repeat steps 3 to 4 to program other tracks.
Press [6, CD] to start play.
5
1 Press [DISC] and then [1] ~ [5] to select the disc.
2 Press [7, CLEAR].
3 Press [PROGRAM].
4 Press [ALBUM ( or
album.
To select an album directly, press the numeric
buttons after pressing [ALBUM (
Press [4, REW / ] or [¢,
5
track.
To select a track directly, press the numeric buttons
after pressing [4, REW / ] or [¢,
6 Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
7 Press [6, CD] to start play.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
To Action
cancel Press [PROGRAM] in the stop mode.
program mode
Press [PROGRAM] then [ 6, CD] in the stop
replay the
program mode.
)] to select your desired
or )].
/ FF] to select the
/ FF].