Recording A Phone Conversation; Setting The Current Day And Time - Samsung SP-R6150 User Manual

Digital cordless answering telephone
Table of Contents

Advertisement

A
S
N S W E R I N G
Y S T E M

Recording a Phone Conversation

You can record your phone conversation while on the phone. Your phone
recognizes the recorded conversation as an incoming message. So, you
can listen to the recorded conversation in the same way that you would
listen to the caller messages on the base. See page 67.
Note: You can only record a phone conversation using the handset.
1. Press
INT
key and then press
conversation. ANSWER MODE and the
window on the handset.
2. Press
MNO
key to record. The handset displays RECORD.
While recording, the phone sounds a beep every 15 seconds to let the
other party know the conversation is being recorded.
3. To stop the recording without ending the call, press
on the handset.
If you press
ABC
key, STOP appears in the LCD window. If you end
the call, recording will be automatically finished.
Notes:
• You can record a phone conversation as long as sufficient memory
space is available.
• When you finish recording your conversation while the answering
mode is off, the
icon blinks in the LCD window on the handset for
5 seconds.
• The total number of messages blinks in the LCD window on the base.
70
key on the handset during
icon appear in the LCD
INT
or
ABC
key

Setting the Current Day and Time

If you set the current day and time, the phone will announce the day and
time when the message was received each time you play back the
message.
To set the current day and time, follow this procedure;
1. Press
key to enter the menu mode.
2. Press
or
key until 5.Time Setting is displayed.
3. Press
key to enter the menu. Mon and OO:OO displays and
Mon blinks . If the time is already set, the current time is displayed.
4. Press
or
key to select the current day of the week.
5. Press
key. The hour digits blink.
6. Enter the current hour by using the key pad on the base.
Note: The time format is 24 hours. Select from 00 to 23.
7. Press
key. Then the minute digits blink.
8. Enter the current minutes.
9. Press
key to save the setting. Your phone announces the day and
time you have set and returns to the Standby mode, where the day
and time is displayed in the LCD window.
Note :
• When you enter the current hour and minute, you can use
key.
• Each time you select the day or enter time, your phone announces the
content currently blinking.
• If you make a mistake while setting, press
time setting menu and start setting over again.
A
S
N S W E R I N G
Y S T E M
or
or
key to exit the
71

Advertisement

Table of Contents
loading

Table of Contents