Chain Dialling - Sharp FO-77 Manual

Chain Dialling

After lifting the handset, you can dial any combination of Normal Dialling,
Rapid Key Dialling and Speed Dialling numbers. For example, if you have
stored an area code or an access code for a special service in a Rapid Key,
you can press the Rapid Key for that area code or access code, then dial the
remainder of the number by pressing a Rapid Key, pressing number keys, or
pressing
Searching for an auto-dial number
You can use
search for the number as described in Searching for an auto-dial number in
Sending a Fax by Automatic Dialling in Chapter 2, then pick up the handset or
press . The number will be dialed automatically (do not press
Redial
The last number dialed can be redialed by pressing
pick up the handset or press
handset to talk.
Hold
You can put the other party on hold during a conversation by pressing
When this is done, they cannot hear you. You can put the handset back in the
cradle without breaking the connection. When you are ready to speak with
them again, pick up the handset. If you did not put the handset back in the
cradle, press
and entering a two-digit Speed Dial number.
to search for a Rapid Key or Speed Dial number. First
). When the other party answers, pick up the
again to resume conversation.
).
(it is not necessary to
.
49