Searching For An Auto-Dial Number - Sharp FO-77 Manual

Searching for an auto-dial number

If you don't remember the Rapid Key or Speed Dial number in which you have
programmed a particular fax number, you can search for the number by
following the steps below. Once you have found the number, you can dial and
transmit the loaded document by simply pressing
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Press
3
Enter the first letter of the stored name by pressing the appropriate
number key (the key below the marked letter) one or more times until the
letter appears in the display. If the name begins with a special character
or number, press
•
If you don't remember the first letter, go to Step 4 (you will scroll through the
list from the beginning).
•
If a name wasn't stored for the number, press
numbers, not names, to appear when you scroll.
4
Press
0). Stop when the desired name appears in the display.
5
Press
connection is established.
38
to set the
and then .
1
.
1
or to scroll through the names (numbers if you pressed
. The document will be automatically transmitted once the
.
READY TO SEND
. This will cause
0