Play From A Bluetooth ® Enabled Device - Philips AEA7000 User Manual

6
Select a song from The Voice: On Stage
and sing along through the wireless
microphone.
7
Use -/+ on the top of the Bluetooth
speaker to adjust volume.
Tip
•
If automatic pairing fails, press and hold on the
speaker for more than 10 seconds to pair the
microphone with the speaker manually.
•
If the wireless microphone remains disconnected from
the Bluetooth speaker for more than 15 minutes, it
®
switches to standby mode automatically. To switch it
on again, you need to slide the OFF/ON switch on the
microphone to theOFF position and then slide back to
the ON position.
•
You can use controls available on the app to adjust
sound effects.
•
If you experience howling or echo, try to increase
the distance between the microphone and speaker
or adjust the angle of the microphone towards the
speaker.
10 EN
Play from a Bluetooth
enabled device
•
The effective operation range between the Bluetooth
speaker and your Bluetooth
approximately 10 meters (30 feet).
•
To pair with a Bluetooth
sure that: no iPad is docked; or you have stopped music
play and exited The Voice: On Stage on your docked
iPad.
•
To pair with a new mobile device, you can press to
remove the existing Bluetooth
•
To play from a Bluetooth
that you are not playing music from your iPad docked
on the Bluetooth
1
Press on the top of the Bluetooth
speaker.
» The Bluetooth
®
2
Enable Bluetooth
that supports A2DP (Advanced Audio
Distribution Profile).
Note
enabled device is
®
enabled mobile device, make
®
enabled device, make sure
®
speaker.
®
indicator flashes blue.
®
on your device
®
®
®
connection.
®
®