Functional Description - Makita DP3002 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
2
1. Switch trigger
2. Lock lever
1
A
B
1. Reversing switch lever
A
1. Hook
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
003020
CAUTION:
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by
increasing pressure on the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push the lock lever
upward.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
Reversing switch action
003027
This tool has a reversing switch to change the rotational direction. Move the
reversing switch lever to the
tion or the
CAUTION:
• Always check the rotational direction before operation.
• Use the reversing switch only after the tool comes to a complete stop. It
will damage the tool to change the rotational direction before the tool
stops.
Hook
003032
When using the hook, pull it out in "A" direction and then push it in "B" direction
1
to secure in place.
When not using the hook, return it back to its initial position by following the
above procedures in reverse.
003033
B
position (A side) for clockwise (forward) rota-
position (B side) for counterclockwise (reverse) rotation.
5