Makita 1902 Instruction Manual page 11

1
1. Screw
2. Edge fence
1. "V"groove
Adjust the edge fence until it comes in contact with the side of the workpiece,
002583
then secure it by tightening the screw.
When planing, move the tool with the edge fence flush with the side of the
workpiece. Otherwise uneven planing may result.
Maximum shiplapping (rabbeting) depth is 9 mm.
2
You may wish to add to the length of the fence by attaching an extra piece of
002584
wood. Convenient holes are provided in the fence for this purpose, and also for
attaching an extension guide (optional accessory).
Chamfering
003634
To make a chamfering cut as shown in the figure, align the "V" groove in the
front base with the edge of the workpiece and plane it.
002587
1
11