Makita 9207SPB Instruction Manual page 6

1. Lock nut
2. Abrasive disc
3. Rubber pad
1
2
1. Lock nut wrench
2. Wrench
1. Wool bonnet
2. Lock nut
3. Rubber pad
6
Installing or removing abrasive disc
003455
Mount the rubber pad onto the spindle. Fit the abrasive disc on the rubber pad
and screw the lock nut onto the spindle.
1
2
3
To tighten the lock nut, hold the spindle with the wrench so that it cannot
003456
revolve, then use the lock nut wrench and securely tighten clockwise.
To remove the disc, follow the installation procedure in reverse.
Installing or removing the wool bonnet
003461
Mount the rubber pad onto the spindle. Screw the lock nut onto the spindle.
To tighten the lock nut, hold the spindle with the wrench so that it cannot
1 revolve, then use the lock nut wrench and securely tighten clockwise.
2
3
Fit the wool bonnet completely over the rubber pad and pull the string tight. Tie
003462
a bow knot and tuck the knot and any loose strings between the wool bonnet
and the rubber pad.
To remove the wool bonnet, follow the installation procedure in reverse.