Table of Contents
Advertisement
Wiring Check
Check that the mobile navigation system is properly wired to the vehicle.
Press SET UP to open the [Setup
Menu].
On the [Setup Menu], select [System
Information] by moving the joystick,
and press ENTER.
On the [Setup Menu - System
Information] menu, select [Wiring
Check], and press ENTER.
a Check the wiring information.
Perform the following operations and
confirm that the 4 lights on the car illus-
tration are turned on.
• Turn on the sidelights
• Pull the side brake
• Pull the side brake and shift into reverse (R)
• [GPS] lamp on
The [Wiring Check Information] menu also contains the following
information:
• Speed:
• ACC Volt:
• Speed Pulse:
• Accuracy level: Shows the learning level of vehicle positioning accuracy.
Select [End], and press ENTER.
Press POS to return to the map display.
a
[Side Light] lamp on
a
[Hand Brake] lamp on
a
[Reverse Light] lamp on
Shows the vehicle speed.
Shows the voltage of the car battery (11 V to 16 V).
Shows the speed pulse emitted by the vehicle.
ENTER
ENTER
ENTER
ENTER
19
Advertisement
Table of Contents
