Copy Your Tapes (Dubbing) - Panasonic AG-513E Operating Instructions Manual

Copy Your Tapes (Dubbing)

Connections you'll need to make.
Playing (Source) VCR
AUDIO VIDEO
OUT
IN
Playback (Source)
1
Insert pre-
recorded tape.
2
3 Press PLAY then PAUSE at
starting point to put in Standby
mode.
(Perform operation of steps 4 and 5 on both units simultaneously.)
4
Press PLAY to start dubbing.
5
Press STOP to stop dubbing.
Selecting Input Mode (TUNER:ON only)
Method 1:
Press INPUT on the unit.
Channel Number
Method 2:
Press CH .
The display will change as follows.
1
2 3
(CABLE) (TV)
LINE 125 or 69
Caution
• Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
IN FROM ANT.
OUT TO TV
Recording (Editing) unit
Select "LINE" mode.
See "Selecting Input Mode" below.
Press REC, then PAUSE/SLOW
immediately to put in Standby mode.
Press PAUSE/SLOW to start
dubbing.
Press STOP to stop dubbing.
Method 3:
a) Press ACTION for MAIN MENU.
LINE b) Press
press ACTION for SET UP TV screen.
c) Press to select "INPUT SELECT," and
then press
d) Press ACTION twice to exit this mode.
Recording (Editing) unit
VIDEO IN AUDIO IN
AUDIO IN
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
to select "TV," then
to select "TUNER" or "LINE."
15