Connect Water Supply Line And Drain Hoses - KitchenAid KUDH03DTBL0 Installation Instructions Manual

Option 2: Left-hand side utility access
• For left-hand routing, remove drain hoses from the clips in
the rear bracket as shown.
Route water supply line and drain hoses into the cabinet.
cZ\
2:::?
• Slide dishwasher partway into the cabinet opening. Allow
for access to the electrical terminal box.
1. Connect water supply line to the water valve under the sink.
2=
3.
4.
A. Hot water supply
Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
Push hoses into Y drain connector until fully seated (Figure B).
Several "clicks" will be heard.
Slide clamps into position (figures C and D).
A
C
B
D
5. Connect the drain hose using one of the following options:
10