Bosch Carephone 61 User Manual page 23

Carephone 61
61 Incoming call recognition
Incoming phone calls can be accepted and terminated by the Carephone
61's emergency call button or by using the wireless transmitter if it is
programmed for emergency call initiation. The ring tone on the Carephone
61 can be switched on or off and the volume can be adjusted.
– 0 = off (no incoming call can be answered and terminated by the
wireless transmitter or call button)
– 1 = with ring tone
– 2 = with loud ring tone
– 3 = with soft ring tone
– 4 = without ring tone (only the phone rings)
62 Loudspeaker volume
This step is used to program the default volume as well as the maximum
and minimum settings. The default volume is the volume at which the
monitoring centre communicates via the Carephone 61.
Minimum setting is low volume. Maximum setting is high volume. Both can
be adjusted by the monitoring centre during a call.
Use settings 1 to 8 to program these three volumes.
63 Acoustical feedback for technical failures
The Carephone 61 can be set to announce technical failures through the
LED lamps and the loudspeaker, or through the LED lamps only.
– 0 = loudspeaker off
– 1 = loudspeaker on
– 2 = loudspeaker on from 7:00 to 21:00
This last setting is only available when the Carephone 61 is connected to a
monitoring centre that gives the unit regularly a real time clock update.
Check with your monitoring centre.
70 Automatic test call interval
You can program the interval between automatic test calls from the
Carephone 61 to the monitoring centre in days. In addition, there is a test
call after power up or leaving programming mode, as well as a test call per
randomization.
– Select from 1 to 28 days.
– 0 = off
Bosch Security Systems User Manual
Programming | en
F.01U.239.30x | V1 | 2011.06
23