Notice to O wn e r Thankyou for selecting the Solution 6000 Security Control Panel for your security needs. Your system includes many advanced features and functions which will be programmed and configured by your security consultant during installation. Depending on the configuration, and your access level, you may have the ability to program certain features within the system to suit changes in your security needs.
Name ....................39 Part Mode 1 Name ..............20 Time ....................39 Part Mode 2 Name ..............20 Day ....................40 Auto Arming .................20 TimeZone Options ..............40 Exit Time ..................21 Name ....................40 Entry Time 1 ..................21 Start / Stop Day ................41 Bosch Security Systems 12/14 BLCC610U...
Page 4
User Guide Solution 6000 Keypad Hi/Lo Temp..............41 Site Name ..................41 Walk Test All Zones ..............41 Battery Test ...................42 Installation Details ..............43 Bosch Security Systems 12/14 BLCC610U...
5-7-0 IP Address 7-7-3 Keypad Hi/Lo Temp 5-7-1 IP Port 7-7-7 Site Name Comms Test System Testing 5-9-0 Send Test Report 7-9-0 Walk Test All Zones 7-9-1 Battery Test Table 1: Control Panel Menu Tree Bosch Security Systems 12/14 BLCC610U...
Fe at ures on, you will usually want all of the zones in your system to be normal, although, you can turn your system on with Listed below are the main features of the Solution 6000 faulted zones. control panel.
Medical alarm to be at the same time. triggered. If programmed the sirens for 2 sec will sound and the monitoring station will be notified. Table 2: Keypad Keys and Their Function Bosch Security Systems 12/14 BLCC610U...
Area is ready to turn All On /Part On heard. If you don’t exit before the delay time Tone Not ready, Zone Open expires and an exit delay door is faulted, an alarm occurs. All On or Part On Flashing Alarm Bosch Security Systems 12/14 BLCC610U...
PIN followed by the [OFF] key. off. The keypad will no longer display the ‘Lock’ or 3. To turn the system (or area) off, enter your PIN, then ‘Part’ icons. press [OFF]. Bosch Security Systems 12/14 BLCC610U...
Some features like DTMF [2] + [8] + [#] + [1] = Turn Output 8 ON disarming and output control need to be enabled by your To log on and turn Output 6 off, enter the following: installer. Bosch Security Systems 12/14 BLCC610U...
2. Verify the user name to be erased and press [OK]. by scrolling using the up and down arrow keys. To abort press [MENU]. + - @ # $ “ & % * : ( ) / < > = Bosch Security Systems 12/14 BLCC610U...
The default PIN for User 1 (Master user) is 2580. If an error tone sounds, try a different new PIN. Enter programming mode (PIN + MENU) then, 4. Press [OK] to save and exit, or press [MENU] to exit Bosch Security Systems 12/14 BLCC610U...
The system will prompt you to present the token to 2. Use the [] and [] keys to select the user that you the keypad. want to add a token for, then press [OK] to select. Bosch Security Systems 12/14 BLCC610U...
[OK]. press [OK] to select. Alternatively, you can enter the user number you want to program, then press [OK]. The keypad will prompt you to enter the RF keyfob Bosch Security Systems 12/14 BLCC610U...
This menu allows the master user to set or change various without saving. options for other users on the system. You should discuss these options with your installer before making changes. Follow the procedure below to configure the required options. Bosch Security Systems 12/14 BLCC610U...
User Expire Date Ur1 Expire Date 01 Jan 2100 Press OK to SAVE 3. Press [OK] to save and exit, or press [MENU] to exit Figure 3: CM729B Fingerprint Reader without saving. Bosch Security Systems 12/14 BLCC610U...
2. Use the [] and [] keys to select the user who’s fingerprint you want to delete, then press [OK] to select. 1. Enter [MENU] + [2] + [0] + [0]. A list of available areas will display on the keypad. Bosch Security Systems 12/14 BLCC610U...
[OK] to select. Alternatively, you can enter the area number you A list of different areas will display on the keypad. want to turn on or off, then press [OK]. Bosch Security Systems 12/14 BLCC610U...
[OK] to Chime is ON. select. Alternatively, you can enter the area number To turn OFF, Press OFF. that you want to program the name, then press To Go Back Press OK [OK]. Bosch Security Systems 12/14 BLCC610U...
[OK] to select. Alternatively, you can enter the area number that you want to program, then press [OK]. 1. Enter [MENU] + [2] + [1] + [7]. The keypad will display the following: A list of different areas will display on the keypad. Bosch Security Systems 12/14 BLCC610U...
The entry time is the amount of time you have to turn your alarm system off once the entry zone have been triggered or opened. 2. Use the [] and [] keys to select the area that you Bosch Security Systems 12/14 BLCC610U...
2. Use the [] and [] keys to select the area that you want to program the entry time for, then press Enter programming mode (PIN + MENU) then, [OK] to select. Alternatively, you can enter the area number that you want to program, then press [OK]. Bosch Security Systems 12/14 BLCC610U...
A list of zones that can be bypassed will display Press OK or MENU on the keypad. A ‘√’ displayed on the right side of the zone name indicates that the zone is already Bosch Security Systems 12/14 BLCC610U...
[OK]. for Part 2, then press [OK]. The keypad will display the following: If the zone is not programmed for Part 2, the keypad will prompt: Bosch Security Systems 12/14 BLCC610U...
[OK] to select. Alternatively, you can enter the output number and then press [OK]. The keypad will display the following when the output is off and OK: Bosch Security Systems 12/14 BLCC610U...
To Go Back Press OK 4. Use the [] and [] keys to move up and down the output array and when finished press [OK] or To turn the output on, press [ON]. [MENU] to exit. Bosch Security Systems 12/14 BLCC610U...
- = Disabled or Not Available Overridden Unlocked Overridden Locked Enter programming mode (PIN + MENU) then, 4. When finished press [OK] or [MENU] to exit. 1. Enter [MENU] + [4] + [0] + [4]. The keypad will Bosch Security Systems 12/14 BLCC610U...
2. Use the [] and [] keys to select the area that you 4. Press [OK] to save and exit, or press [MENU] to exit want to test the internal sirens in, then press [OK]. without saving. Alternatively, you can enter the area number, then press [OK]. Bosch Security Systems 12/14 BLCC610U...
5 seconds. forward on and call forward off sequence accordingly Enter programming mode (PIN + MENU) then, when you turn Area 1 All On and off (arm and disarm). Bosch Security Systems 12/14 BLCC610U...
SMS) Messages should clearly describe the premises and zones When voice reporting is selected the user who answers the so that the user receiving the telephone call from the Bosch Security Systems 12/14 BLCC610U...
*61 (To turn Call Forward On – After Time). have been configured by your installer. See MENU 5-1-1 for Telephone number that you want calls to go to (e.g. more information. 0416123456). *5# (End of Call Forward sequence after 5 seconds). Bosch Security Systems 12/14 BLCC610U...
2. Using the numeric keys, enter all the digits of the call forward off sequence. address that the system will send email reports to. A maximum of 80 characters can be used to program the You can change a single digit by scrolling the cursor Bosch Security Systems 12/14 BLCC610U...
1. Enter your Master PIN + [MENU]. 2. Enter [5] + [5] + [9] + [OK]. The keypad will display the list of current options. Options with a preceeding tick mark are selected. Bosch Security Systems 12/14 BLCC610U...
Devices > Commands > The keypad will display the following: Keypad Contrast MENU 6-0-8 This menu allows you to adjust the contrast of the keypad’s LCD display. Each keypad can have their display adjusted separately. Bosch Security Systems 12/14 BLCC610U...
0-9 keys Trigger Table 1 Phone 1 4. Press [OK] to save and exit, or press [MENU] to exit without saving. +61423474345 Press 0-9 OK to SAVE Bosch Security Systems 12/14 BLCC610U...
Line 1 Displays: The panel number that you are getting information from. 2. If viewing system trouble conditions, the keypad The Solution 6000 is only configured to work with one will display similar to the following: panel. Line 2 Displays: Panel 1 The panel name and firmware version number.
Page 37
Phone Line In Use The system is using the phone line. Battery Trouble The system has detected that the Real Time Clock Module backup battery voltage is low or missing Table 8: Control Panel Trouble Messages Bosch Security Systems 12/14 BLCC610U...
- = TimeZones 06 to 08 and TimeZones 13 to 16 are Kp1 Keypad 1 Name disabled or not used. Panel 1 Dest 1 at 01-Apr 03:41:57 3. Press [OK] or press [MENU] to exit. Bosch Security Systems 12/14 BLCC610U...
Tz3 TimeZone 3 Name the week. Tz4 TimeZone 4 Name Press OK or MENU The following options allow you to vary or change the Bosch Security Systems 12/14 BLCC610U...
3. Use the [] and [] keys to select the period in the Press OK to SAVE timezone that you want to change, then press [OK] to select. 3. To program the holiday name, use the [] and [] The keypad will display the following: Bosch Security Systems 12/14 BLCC610U...
[OK] to select. Press OK to SAVE Alternatively, you can enter the area number, then press [OK]. 2. Use the [] and [] keys to program the ‘High’ and Bosch Security Systems 12/14 BLCC610U...
To Go Back Press OK If the battery has passed the test, the keypad will display: Battery Test Passed Press OK To Continue To Go Back Press OK If the battery has failed the test, the keypad will display: Bosch Security Systems 12/14 BLCC610U...
Solution 6000 User Guide I n sta l l at io n De t ails INSTALLED BY: DATE PHONE: FAX: EMAIL: SERVICE PHONE: FAX: EMAIL: MONITORED BY: PHONE: FAX: EMAIL: WARRANTY EXPIRES: NOTES: Bosch Security Systems 12/14 BLCC610U...
Page 44
Internal Siren Test ............28, 29 Device Status ................34 Doors Names ..................28 Door Array ................27 Status ..................25 Strobe Test ................29 Door Assignment ..............16 Door Status ................27 Turn On/Off ................26 Bosch Security Systems 12/14 BLCC610U...
Page 45
Array ..................38 Name ..................39 Options ................... 40 Set Days .................. 40 Set Start/Stop Times ............39 User Access ................15 Tokens Add ..................13 Delete ..................13 Edit ..................14 Status ..................13 Bosch Security Systems 12/14 BLCC610U...
Page 46
User Guide Solution 6000 Bosch Security Systems 12/14 BLCC610U...
Page 47
Solution 6000 User Guide Bosch Security Systems 12/14 BLCC610U...