Table of Contents
Advertisement
Available languages
Available languages
To eliminate the risk of burns
or fire by reaching over
heated surface units, cabinet
storage space located above
the surface units should be
avoided, if cabinet storage is
to be provided, the risk can
be reduced by installing a
range hood that projects
horizontally
a minimum
of 5"
beyond the bottom
of the
cabinets.
Cabinet
and countertop
dimensions
•
Check for wall and cabinet clearances where the range will be installed.
Check the stability of the floor where the range will be installed.
Check for proper electrical and gas supply.
Note: All dimensions provided are minimal unless otherwise stated.
18"
Minimum
on
either
side
of
rang_
Maximum
depth
for cabinets
above
ramge
top
height
from
cooktop
to cabinets
i
...............
i
i[
i
Back
Wail
Fig. A
Back
Wall
Fig. B
Install a flush mount
240V 40/50 ampere
electrical wall outlet
in the shaded area.
Do not seal the range to side cabinets.
Do not pinch the power supply cord between the
range and the wall.
If cabinet depth is greater than 25", the oven front
frame must extend beyond cabinet front by 1/2"
minimum.
All openings
in the wall or floor where the range is
to be installed must be sealed.
BaokWa JJ;"
: _1=1/4"
4"**
;
This shaded flo_
_
3"
area is for thru the
Max.
floor connection of
Add 1/2" NPT 90°
gas pipe stub and
black pipe elbow to
shut-off valve,
the gas supply pipe
stub and orient the
Fig. C
elbow as shown.
Note: The gas supply pipe stube and elbow
assembly centerline
should not exceed 4"
height form the floor.
---_
_
Advertisement
Table of Contents
