Cab-1 Remote Controller Commands - GE VISION Line ES44AC Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller commands

T
he CAB-1 Remote Controller commands are detailed below. The corresponding
RailSounds sound system effects are in bold italic type.
Releases the ElectroCoupler on the front of the
locomotive. Coupler release sound.
Releases the ElectroCoupler on the rear of the
tender. Coupler release sound.
Activates the numeric keypad.
Short air release sound.
Toggles the headlight and rear light on and off.
Electric circuit breaker snap.
Accelerates the locomotive with a clockwise
rotation. Decelerates the locomotive with a
counter-clockwise rotation.
Speed-dependent RPM sounds.
Activates the locomotive's horn. Release the
button to discontinue the sound.
Horn sound.
Toggles the bell sound on and off.
Mechanical bell sound.
Changes the locomotive's direction. The locomotive
decelerates to a stop and continues in the opposite
direction when you increase the throttle.
Air release sound.
Increases the locomotive's speed while the button
is pressed. Release the button to return to the
initial speed. RPM increase.
Decreases the locomotive's speed while the button
is pressed. Squealing brake sounds.
Shuts down all PowerMasters on your railroad.
Stops all TrainMaster Command Control-equipped
locomotives in operation. Use HALT only in
emergency situations.
6-28306 Hybrid.indd 24
SET
L = 32 speed steps
M = 100 speed steps
H = 100 speed steps
with momentum.
24
L M H
12/16/09 2:57 PM