Honeywell F50F Owner's Manual page 3

Welcome...
...to the world of high efficiency air cleaning. Your Honeywell electrostatic air cleaner does exactly what its name suggests - it
cleans the air in the duct of tobacco smoke, dust, pollens and the vast majority of other airborne contaminants that reduce
furnace and air conditioner efficiency, stain walls and generally make the room or building a less comfortable place to live. With
this Honeywell electrostatic air cleaner you can expect to enjoy the benefits of clean air for years to come.
The air cleaner meets all relevant EU Directives.
OPERATING YOUR F50 AIR CLEANER
Your Electrostatic Air Cleaner has one or two cells depending on the model. These instructions apply to all models. To follow
these instructions please refer to the diagram on the inside front flap of this booklet.
Please retain this booklet for future reference.
Set the on-off switch  in the power box to ON. The air cleaner will now operate whenever your
furnace or air conditioning system fan operates.
For maximum air cleaning benefit and cleaner air conditioning coils, leave the air cleaner switch
ON at all times.
M5886A
When the fan and air cleaner come on, the neon indicator lights.
M5889A
You may hear a snapping (or arcing) sound occasionally as the air cleaner operates. This is
usually caused by a larger dust particle and confirms that the air cleaner is working as it should.
To hear the snapping sound, momentarily press the 'TEST' button  which is at the bottom of the
door. Use the TEST button at any time to confirm air cleaner operation.
M6032A
When the fan and air cleaner stop the neon light goes out (as does the 'ON' LED on the remote
Performance Indicator unit). The air cleaner is off until the heating or air conditioning fan starts
again.
M5888A
GETTING THE MOST FROM YOUR ELECTROSTATIC AIR CLEANER
Run the air cleaner as much as possible.
For maximum cleaning efficiency the air cleaner should run all the time. To do this set the fan switch to ON and make sure the air
cleaner is switched ON too. The fan and air cleaner will run even when the furnace or air conditioner is OFF.
NOTE: The additional cost of running the air cleaner full-time is minimal! The air cleaner actually uses less power than
a 40 watt light bulb! Two cell models - 33 watts; single cell models - 22 watts. The small added cost is more than
offset by the added benefits of full time air cleaning and full time air circulation. In addition, some people feel
that room temperatures stay more even when the fan is always running.
If your fan cannot be controlled independently, you can still obtain maximum available air cleaning benefit. Make sure the air
cleaner is always switched ON so it operates whenever the furnace or air conditioner is on.
3
F50F
69-1162M—01