Appendix; Unsupported Commands - Cisco 10000 Series Troubleshooting Manual

Unsupported Commands

Following is a list of the commands that are not supported in IOS release 12.0(9)SL for the
Cisco 10000 series router:
Unsupported Frame Relay Commands
FRF.12 fragmentation commands
•
• FRF.11 VoFR commands
frame-relay adaptive-shaping {becn | foresight}
•
• frame-relay bc {in | out} bits
frame-relay be {in | out} bits
•
• frame-relay cir {in | out} bps
frame-relay custom-queue-list list-number
•
• frame-relay de-group group-number dlci
frame-relay ip [rtp | tcp] header-compression [passive]
•
• frame-relay map protocol protocol-address dlci [broadcast] [ietf | cisco] [payload-compress
{packet-by-packet | frf9 stac [hardware-options]}]
frame-relay map ip ip-address dlci [broadcast] [cisco | ietf] [nocompress] tcp
•
header-compression {active | passive}
• frame-relay mincir {in | out} bps
frame-relay traffic-rate average [peak]
•
frame-relay traffic-shaping
•
show frame-relay ip [rtp | tcp] header-compression [interface]
•
Unsupported PPP Commands
compress [predictor | stac | mppc [ignore-pfc]]
•
debug ppp cbcp
•
ppp bridge appletalk
•
ppp bridge ip
•
ppp bridge ipx [novell-ether | arpa | sap | snap]
•
ppp reliable-link
•
OL-0439-02
A P P E N D I X
Cisco 10000 Series Router Troubleshooting Guide
A
A-1