Table of Contents
Advertisement
Hold-Down
Adjustment
Items Needed
To adjust the hold-down:
1.
Figure 17.
2.
3.
Step 2
4.
Tip: To avoid scratching the surface of your
workpiece, apply thin rubber pads to the bottom
of the hold-down fingers.
Qty.
Figure 17
Blade Adjustment
Tools Required
To perform the blade adjustment:
1.
Figure 18.
2.
3.
NOTICE: The moving blade should never
overlap the fixed blade. This will cause dam-
age to both.
Qty.
Figure 18
Advertisement
Table of Contents
