WARNING!
Remove all the packaging and the
transit bolts before you install the
appliance.
POSITIONING AND LEVELLING
Never place cardboard, wood or
similar materials under the ma-
chine to compensate for any un-
evenness in the floor.
If it is impossible to avoid positioning the
machine next to a gas cooker or coalburn-
ing stove, an insulating panel covered
with aluminium foil on the side facing the
cooker or stove, must be inserted be-
tween the two appliances.
12.
Put the plastic caps in the holes. You
can find these caps in the user man-
ual bag.
We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.
• Install the machine on a flat hard floor.
• Make sure that air circulation around
the machine is not impeded by carpets,
rugs etc.
• Carefully level by screwing the adjusta-
ble feet in or out.
• After having levelled the appliance,
tighten the lock nuts.
• The appliance must be level and stable.
Before placing it on small tiles, apply a
rubber coating.
The water inlet hose and the drain hose
must not be kinked.
CAUTION!
The machine must not be installed
in rooms where the temperature
can drop below 0°C.
ENGLISH
33