Crank Handle
The crank handle is normally installed on the
front right lead screw shaft, and is held in place
with two setscrews already threaded into the han-
dle, as shown in Figure 3. The crank handle can
be installed on the right or left side of the machine
to maximize operator comfort and convenience.
Figure 3. Crank handle attachment.
-12-
Setscrew
G1066Z Control Panel
To mount the control panel to the base unit on
the Model G1066Z:
1.
Match the holes in the control arm mounting
plate to the threaded holes on the side of the
the sander.
5
2.
Use the
⁄
"-18 x 1" hex bolts and washers to
16
secure the control arm to the sander body as
shown in Figure 4.
Figure 4. Control panel attached to base unit.
G1066/G1066Z/G1079 Drum Sander