HP Compaq 6005 Pro Business PC Maintenance & Service Manual page 33

Table 3-4 Computer Setup—Security (continued)
Option Description
Device Security Allows you to set Device Available/Device Hidden for
●
●
●
●
●
●
●
●
●
USB Security Allows you to disable individual or groups of USB ports.
Slot Security Allows you to disable PCIe and PCI slots along with cards plugged into them.
Network Service Boot Enables/disables the computer's ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI expansion
card or embedded on the system board.)
System IDs Allows you to set:
●
●
●
●
DriveLock Security Allows you to assign or modify a master or user password for hard drives. When this feature is
enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither
is successfully entered, the hard drive will remain inaccessible until one of the passwords is
successfully provided during a subsequent cold-boot sequence.
NOTE:
is attached to the system. You may need to power-cycle the system and re-enter F10 Setup in order
to manage DriveLock passwords.
See the Desktop Management Guide for more information.
Serial ports
Parallel port
System audio
Network controllers (some models)
Embedded security device (some models)
SATA0
SATA1
SATA2
SATA3
Asset tag (18-byte identifier), a property identification number assigned by the company to the
computer.
Ownership tag (80-byte identifier) displayed during POST.
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be
updated if the current chassis serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
Keyboard locale setting (for example, English or German) for System ID entry.
This selection will only appear when at least one drive that supports the DriveLock feature
Computer Setup (F10) Utilities 21