Beginning Assembly; Installing Feet - Grizzly G0512 Instruction Manual

Beginning Assembly

This section will cover the minimum assembly
and adjustment instructions needed to begin
operation. For best results, complete the assem-
bly in the order provided in this manual and then
read the remaining portion of the manual before
attempting any type of operations.
Safety must come first! Read and follow these
instructions before beginning assembly:
Disconnect power to the
machine when perform-
ing all assembly steps.
Failure to do this may
result in serious person-
al injury.
Some metal parts may
have sharp edges on
them
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Most of your Edge Sander has been assembled
at the factory, but some parts must be assembled
or installed after delivery.
-12-
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
after they

Installing Feet

To install the feet on the sander:
1.
Thread the feet into the bottom of the stand
as shown in Figure 5.
Figure 5. Stand foot threaded onto stand.
are
Stand Foot
G0512 Edge Sander