Load Optimized Defaults; Supervisor/User Password; Save And Exit Setup; Exit Without Saving - Fujitsu PTM900 Manual

Load Optimized Defaults

This submenu is selected for default settings which provide the best system
performance.

Supervisor/User Password

To enable the Supervisor/User passwords, select the item from the Standard
CMOS Setup. You will be prompted to create your own password. Type your
password up to eight characters and press Enter. You will be asked to confirm the
password. Type the password again and press Enter. To disable password, press
Enter twice when you are prompted to enter a password. A message appears,
confirming the password is disabled.
Under the BIOS Feature Setup, if Setup is selected under the Security Option
field and the Supervisor/User Password is enabled, you will be prompted
password every time you try to enter the CMOS Setup Utility. If System is
selected and the Supervisor/User Password is enabled, you will be requested to
enter the Password every time when you reboot the system or enter the CMOS
Setup utility.

Save and Exit Setup

After you have made changes under Setup, press Esc to return to the main menu.
Move cursor to Save and Exit Setup or press F10 and then press Y to change the
CMOS Setup. If you did not change anything, press Esc again or move cursor to
Exit Without Saving and press Y to retain the Setup settings. The following
message will appear at the center of the screen to allow you to save data to
CMOS and exit the setup utility: SAVE to CMOS and EXIT (Y/N)?

Exit without Saving

If you select this feature, the following message will appear at the center of the
screen to allow you to exit the setup utility without saving CMOS modifications:
Quit Without Saving (Y/N)?
PTM900 Mainboard Manual
3- 13