Creating A Multiparty Conference - Hitachi SelecSet 900 Series User Manual

Creating a Multiparty Conference

Procedure
Busy tone
while adding a
party
HCXTD850, Rev. A02, August 2001
To create a multiparty conference, follow these steps:
1
While connected to one party, press <CONF> to place
the party on consultation hold.
2
Listen for dial tone.
3
Dial a second party.
4
When the called party answers and is ready to join the
conference, press <CONF> to bring the parties
together.
5
To add another party, press <CONF> again. The two
other parties are automatically placed on hold.
6
To announce the conference to the new party, wait
until the called party answers and announce the
conference before pressing <CONF> to connect all
parties. Or, connect all parties immediately by
pressing <CONF> as soon as the called party picks
up.
7
Repeat these steps to add additional conferees. You
can have a total of six people in a multiparty
conference.
If you hear busy tone while adding a party, press <DISC>
to disconnect the busy party, and dial the next party. To
rejoin the other parties, press the blinking CAP key. To
remove yourself from the conference, hang up. The other
parties can continue to speak.
C M
REATING A ULTIPARTY
C
ONFERENCE
2-35