Buzzer (Buzz) - Hitachi SelecSet 900 Series User Manual

Buzzer (BUZZ)

About the buzz
feature
Procedure
Programming
an autodial key
for BUZZ
HCXTD850, Rev. A02, August 2001
The buzz feature is typically used for secretaries, in
situations where one or more people need a way to buzz
the secretary's station without interrupting or placing an
active call on hold.
To use the buzz key, follow these steps:
1
Press the <BUZZ> key to let the secretary know that
you need something.
2
The secretary's phone buzzes, and the <BUZZ> key
lights on your phone.
To program an autodial key, follow these steps:
1
Lift your handset or press <SPKR>.
2
Enter the speed dial register
feature access code.
3
Press the desired autodial key.
4
Enter the BUZZ feature access code.
5
Dial the station number you want to buzz.
6
Wait for confirmation tone (three short beeps).
B (BUZZ)
UZZER
2-17