D-Link DCS-3715 User Manual page 39

Configuration
4. Go to Setup > Network > IP settings. Select PPPoE and enter the user
name and password provided by your ISP. Click Save to enable the
setting.
5. The camera will reboot.
6. Disconnect the power to the camera. Remove it from the LAN environment.
IPv6
Enable IPv6: Select this option and click Save to enable IPv6 setting. Please
note that this only works if your network environment and hardware equipment
support IPv6. The browser should be Microsoft ® Internet Explorer 6.5, Mozilla
Firefox 3.0 or above.
When IPv6 is enabled, by default, the camera will listen to router
advertisements and be assigned a link-local IPv6 address accordingly.
IPv6 Information: Click this button to obtain the IPv6 information. If your
IPv6 setting are successful, the IPv6 address list will be listed in the pop-up
window.
Please follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar of your
web browser.
3. Press Enter on the keyboard or click Refresh button to refresh the
webpage.
Manually Setup the IP Address: Select this option to manually configure
IPv6 setting if your network environment does not have DHCPv6 server and
advertisements-enabled routers.
D-Link DCS-3715 User Manual 39