Kenmore 790.9507 Series Use & Care Manual page 18

Induction range
Table of Contents

Advertisement

Oven Controls
Setting 12 Hour or 24 Hour Display Mode
The clock display mode allows you to select 12 hr or 24 hr
modes. The factory pre-set clock display mode is 12 hours.
To set 12 hr or 24 hr display mode:
1.
Press and hold
for 6 seconds.
2. Press the Up / Down arrow keys to toggle between 12 Hr
day or 24 Hr day display modes (See
3. Press
to accept the choice.
Figure 21: 12 Hr dAy and 24 Hr dAy settings
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 12 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 12 hour energy saving
feature:
1.
Press and hold Timer ON/OFF for 6 seconds
2. Press the Up / Down arrow keys to toggle between 12 Hour
OFF or Stay On feature (See
3. Press
to accept choice.
Figure 22: 12 hr energy saving (L) and continuous setting (R)
Figure
21).
Figure
22).
Changing Temperature Display to Fahrenheit (ºF) or
Celsius (ºC)
The electronic oven control is set to display °F when shipped
from the factory. The display may be changed to show either °F
or ºC oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F:
1.
Press and hold Broil for 6 seconds.
2. Once F (or C) appears in the display, press the Up / Down
arrow keys to toggle between Fahrenheit and Celsius
temperature display modes (See
3. Press
to accept the choice.
Important note:
The oven temperature display cannot be changed during the
cooking process or if a Delay Start has been set or Self Clean is
active.
Figure 23: Display showing Fahrenheit and Celsius
Setting Silent or Audible Control mode
Silent mode allows the oven control to operate without audible
tones. The control may be programmed for silent operation and
later reset to operate with all the normal audible tones.
To set for silent or audible mode:
1.
Press and hold Delay Start for 6 seconds.
2. Press the Up / Down arrow keys to toggle between bEEP On
or bEEP OFF (See
Figure
3. Press
to accept the choice.
Figure 24: Display showing audible and silent operation
18
Figure
23).
24).

Advertisement

Table of Contents
loading

Table of Contents