Air Supply - Grizzly H8208 Instruction Manual

Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety
or operational information is not
understood or followed.
Model H8208 50-Piece Air Tool Set
OPERATIONS
LUNG/EAR
INJURY HAZARD!
Wear protective
equipment when
using this tool.
ACCIDENTAL
START HAZARD!
Disconnect before
service or tool
changes.
AIR PRESSURE
HAZARD!
Never exceed max
PSI rating for tool.
EYE INJURY
HAZARD!
Wear protective
equipment when
using these tools.

Air Supply

These air tools require 90 PSI to operate
correctly. To improve air tool lifespan, use
a filter/lubricator/regulator setup shown in
Figure 2. Otherwise, lubricate daily with a
couple drops of pneumatic tool oil directly
into the tool's air inlet fitting
Quick
Quick
Connector
Connector
Your
Tool
Quick
Coupler
Air Hose
Figure 2. Installed filter lubricator
regulator.
Air Ratchet
Your new ⁄ " drive air ratchet (Figure 1) is
3
8
designed with a 9" long handle to provide
plenty of leverage to hold the 50 ft/lbs. of
torque that this tool develops.
Included in this kit is a
socket set with common sizes, and a
to ⁄ " drive adapter so you can use the
1
2
⁄ " drive impact sockets with your ratchet.
1
2
Also included is a
so you can use screwdriver bits included
with this set.
For those tight places where the air
hose may interfere with your project
environment, install the supplied universal
swivel air supply connection.
At the drive end of the ratchet you can
change rotation by turning the thumb dial.
The speed of the ratchet is adjusted by
handle paddle position, but the torque is
not changed.
Lubricator
Regulator
Air
Compressor
Quick
Filter
Coupler
⁄ " drive impact
1
2
⁄ " to ⁄ " drive adapter
3 1
8 4
⁄ "
3
8
-5
-