Grizzly H0582 Instruction Sheet

EYE/EAR INJURY HAzARD!
Wear safety glasses and
hearing protection when
using this tool!
Always disconnect tool from
air to prevent unexpected
operation during service!
DO NOT EXCEED 120 PSI!
Personal
occur.
SHATTERINg
Use
impact wrench use only.

Specifications

Drive Size .......................................................... 1"
Bolt Size Capacity .......................................... 1
No-Load Speed .................................. 3,800 RPM
Maximum Torque ................................. 1,200 ft/lb
Air Inlet Size .............................................
Air Consumption ...................................... 12 CFM
Operating Pressure ................................... 90 PSI
Maximum Operating Pressure ................. 120 PSI
Weight ....................................................12.75 lbs
Inventory
A. Impact Wrench ........................................... 1
B. Handle ........................................................ 1
C. Nut .............................................................. 1
Setup
Secure the handle to the impact wrench with the
nut, so the assembled tool looks like Figure 1.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
WARNINg: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF gRIzzLY INDUSTRIAL, INC.
INJURY HAzARD!
injury could
HAzARD!
sockets rated
⁄ " NPT
1
4
COPyRIgHT © OCTOBER, 2008 By gRIzzLy INDuSTRIAL, INC.
#TR11306 PRINTED IN TAIWAN
IMPACT WRENCH
INSTRUCTION SHEET
for
Operation
For best performance, connect your wrench to
the air supply with a
the forward/reverse switch left or right to make
the wrench turn clockwise or counterclockwise.
⁄ "
3 Adjust the throttle dial to increase or decrease
4
torque.
Maintenance
The impact wrench MuST be regularly lubricated
with 3-4 drops of air tool oil directly into the air fit-
ting before each use. For best results, we recom-
mend using an in line filter, lubricator, and regula-
tor, as shown in Figure 2.
Quick
Connector
Your
Tool
Quick
Coupler
MODEL H0582
1" HEAVY–DUTY
PIN-CLUTCH
Handle
Forward/Reverse
Figure 1. Model H0582
⁄ " air line and fittings. Slide
1
2
Quick
Lubricator
Connector
Quick
Air Hose
Coupler
Figure 2
Installing your tool.
.
Throttle Dial
Switch
Regulator
Air
Compressor
Filter