After First 50 Hours; Weekly; Every 300 Hours - Grizzly G8297 Instruction Manual

After First 50 Hours

After the first 50 working hours, or 30 days,
whichever comes first, replace the oil in the
motor with compressor oil (use ISO 100 or SAE
30W viscosity, non-detergent type).
Also after this initial operation period, check to
make sure that all the fittings are tight. Remove
the air filter foam element (See Figure 9) and
rinse it out in water. Allow it to dry and reinstall.
Blow out any accumulated dirt between the cylin-
der cooling fins.
Fig 9. Air filter cover and foam element.

Weekly

If the compressor is used on a regular daily basis,
perform the following checks each week:
1. Rinse the air filter foam element in water.
2. Check for loose bolts or fittings.
G8297/G8298/G8299 Air Compressors

Every 300 Hours

After every 300 hours or 3 months of regular
operation, perform the following maintenance
items:
1. Change compressor motor oil.
2. Rinse the air filter foam element in water.
3. Check for air leaks and correct as needed.
4. Clean cylinder head fins for proper cooling.
5. Check for loose bolts or fittings.
-13-