Honda SUBWOOFER KIT Installation Instructions Manual page 8

32. Secure the vehicle harness to the left subwoofer
bracket with one wire tie with clip in the area
shown.
SE Models:
• Install the heated seat relay on the left
subwoofer bracket with one 5 x 10 mm
washer-bolt and 5 mm flange nut in the area
shown, and plug the vehicle connector into the
heated seat relay.
5 mm FLANGE NUT
(With heated seat)
HEATED SEAT
RELAY
(With heated seat)
VEHICLE
CONNECTOR
33. Remove the four screws from the subwoofer.
SUBWOOFER
8 of 11
LEFT SUBWOOFER
BRACKET
WIRE TIE
WITH CLIP
VEHICLE
HARNESS
5 x 10 mm
WASHER-BOLT
(With heated seat)
4N18511K
SCREW
(Reuse.)
4413181K
34. Install the subwoofer to the subwoofer brackets
attached to the bottom of the driver's seat with
four screws.
RIGHT
SUBWOOFER
BRACKET
SCREW
(Reuse.)
SUBWOOFER
35. Secure the subwoofer harness to the driver's seat
frame with two wire ties in the areas shown.
SUBWOOFER
HARNESS
200 mm
WIRE TIE
AII 30529 (0509)
LEFT
SUBWOOFER
BRACKET
(HEATED
SEAT RELAY)
(HEATED
SEAT RELAY)
DRIVER'S
SEAT FRAME
WIRE TIE
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
4N19502K
4N19512K