Start Wait Time; Remote Ui Set; Ethernet Driver - Canon LBP 3370 User Manual

■ START WAIT TIME

0 to 300 seconds; 0 seconds*
Specifies the time interval from when the printer is turned ON to when the protocol
starts.
NOTE
For more details on startup waiting time, see "Chapter 2 Common Network
•
Settings" in Network Guide.
This item is displayed only when NETWORK in the I/F CONNECTION options is
•
set to ON.

■ REMOTE UI SET.

REMOTE UI ..........................ON*, OFF
Specifies whether the printer should use the Remote UI.
NOTE
This item is displayed only when NETWORK in the I/F CONNECTION options is
set to ON.

■ ETHERNET DRIVER

AUTO DETECT.....................ON*, OFF
1
COMM.MODE* ....................HALF DUPLEX*, FULL DUPLEX
ETHERNET TYPE*
MAC ADDRESS....................(Display only)
*1 COMM.MODE and ETHERNET TYPE are displayed only when AUTO DETECT is set to OFF.
Configures the Ethernet driver.
NOTE
For more details on configuring the Ethernet driver, see "Chapter 2 Common
•
Network Settings" in Network Guide.
This item is displayed only when NETWORK in the I/F CONNECTION options is
•
set to ON.
1
.............10 BASE-T*, 100 BASE-TX
SETUP Menu Settings
6
6-35