Power Save Time; Pwr Save In Err; Auto Error Skip - Canon LBP 3370 User Manual

PWR SAVE IN ERR

POWER SAVE TIME

6

AUTO ERROR SKIP

6-12 SETUP Menu Settings
ON*, OFF
Specifies whether the printer should enter Power Save Mode when an error is
occurring in the printer (when the
the message blinks).
If this item is set to ON, the printer enters Power Save Mode even when an error is
occurring in the printer.
If this item is set to OFF, the printer does not enter Power Save Mode when an
error is occurring in the printer.
15 minutes*, 30 minutes, 60 minutes, 180 minutes, 5 minutes
Specifies the time interval until the printer enters Power Save Mode 1 (the Panel
Off mode).
NOTE
If the printer is in any of the following status, the printer does not enter Power Save
Mode (the Panel Off mode) even when the specified time has elapsed.
- An error is occurring in the printer (when the
number in the message blinks), and PWR SAVE IN ERR is set to OFF.
- During the printer's startup
OFF*, ON
Specifies whether the printer should automatically use the function that, when an
error has occurred, releases the printer from the error temporarily (Error Skip) and
continues the job.
If OFF is specified, you need to skip the error by pressing the
If ON is specified, the printer skips the error automatically without you pressing
the (Online) key.
NOTE
The Error Skip function is only for skipping an error temporarily. Therefore, the data
•
may not be printed properly.
For the types of error from which the printer can be released temporarily, see
•
"Message List," on p. 8-26.
If ON is specified for this item, the printer automatically skips all the errors it can
•
skip automatically even when multiple errors are occurring.
(Message) indicator is on, or the number in
(Message) indicator is on, or the
(Online) key.