Paper Sizes And Document Formats; When Receiving Long Documents - NEC IT3510 Operation Manual

Issue 1
3.4
3.5
5 - 26
If memory becomes full, no further document data can be stored.
Ë

Paper Sizes and Document Formats

The received document sizes can be:
Ë
Ledger (11" by 17")

Legal (8 1/2" by 14")

Letter (Portrait - 8 1/2" by 11")

Letter (Wide - 11" by 8 1/2")

If the recording paper installed is not the same size as that of the
Ë
receiving facsimile, the document is either printed on the next larger size
paper (if installed), or the facsimile is reduced to fit on the available
paper size.
For example, if a ledger-sized document is received and the IT3510/
IT2510 has only letter-sized paper installed, the document is reduced
and printed on the letter-sized paper. Refer to Section 2.10 Settings for
Received Documents in Chapter 3 Registration and Setting Operations
on page 3-27.
When letter-sized documents are received, the page is rotated by 90
Ë
and will be printed, even though the documents were inserted (at the
source-end) in a different direction than the print paper (Rotation Print).
A received document cannot be printed on paper inserted in the Manual
Ë
Bypass Tray.

When Receiving Long Documents

When a document is received that is longer than the normal paper sizes,
Ë
the document image is reduced as shown below.
optimal reduction ratio is automatically selected to fit the image onto the
print paper.
Basic Sending and Receiving Operations
NEC IT Series
o
In this case, the