NEC IT3510 Operation Manual page 246

Issue 1
3 - 52
Registering One-Touch Keys (Continued)
4.
Enter the destination's name to
be displayed on the One-Touch
key, then touch [Next].
5.
Enter the Abbreviated Number
(three digits), then touch [Next].
i
To re-enter the Abbreviated
Number:
Press <C> and re-enter the number.
6.
Use the 10-key Pad to enter the
facsimile number of the
destination, and touch [Com.
Mode]. When the
communications mode is not set,
touch [Next] after entering the
facsimile number, then go to
step 10.
i
The destination's facsimile
number can be up to 64 digits.
i
A three second pause may be
added to the number by pressing
<Pause>.
i
If the NEC IT3510/IT2510 is set
for dial pulse (DP) dialing, a
touch-tone can be dialed by
touching [Tone].
Refer to Overseas (International)
Transmission on page 3-54, and
Registering the F Code on page
3-63, as needed.
NEC IT Series
Registration and Setting Operations