Table of Contents
Advertisement
Warning
• Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.
Changing the light bulb
• Disconnect the unit from the mains power supply.
• Remove the grease filters.
• Replace the old light bulb with a new light bulb of the same kind.
• Refit the grease filters.
• If the light does not come on, make sure the bulb has been screwed
in correctly before contacting the technical assistance service.
Cleaning
• Warning: always disconnect the hood from the mains power supply
before cleaning it.
Never insert pointed objects in the motor's protective grid.
• Wash the outside surfaces using a delicate detergent solution.
Never use caustic detergents or abrasive brushes or powders.
• Only ever clean the switch panel and filter grille using a damp cloth
and delicate detergents.
• It is extremely important to clean the unit and change the filters at
the recommended intervals. Failure to do so will cause grease
deposits to build up that could constitute a fire hazard.
Special accessories
Carbon filter KF 12/13
Technical assistance service
You are welcome to telephone our technical assistance service (see list of
technical assistance centres) whenever you need information or in the
unlikely event of a fault.
When calling, please be ready to specify:
1.
The model code number
2.
The serial number (E-Nr.)
3.
The manufacturing number (F-Nr.)
This information is shown on the registration plate inside the unit
behind the grease filter.
We reserve the right to change specifications and colours as a result of
our policy of continuing technological development.
56
E-Nr. 942 120 603
Advertisement
Table of Contents
