Ignition Switch - Honda CH250 ELITE250 Owner's Manual

FUSE REPLACEMENT
The main fuse (1) is near the battery. The
specified fuse is 20A.
The fuse box (2) is inside the glove box
The specified fuses are 10A and a 5A'
When frequent fuse failure occurs it
usually indicates a short circuit or' an
overload in the electrical system. If this
happens, the electrical system should be
checked visually for damaged insulation
or other possible malfunctions. If the
problem cannot be located visually, the
scooter should be examined by an autho-
rized Honda scooter dealer.
* Never use a fuse with a different rating
from that specified. Serious damaae to
the electrical system or a fire may re-
sult, causing a dangerous loss of lights
or engine power at night or in traffic.
CAUTION:
* Turn the ignition switch OFF before
checking or replacing the fuse to pre-
vent acciden tal short-circuiting.