Honda CH250 ELITE250 Owner's Manual page 32

REAR BRAKE LOCK
Be sure to keep the rear brake lock is
applied while starting and warming up the
engine.
To apply the brake lock:
1. Depress the rear brake pedal.
2. While holding the rear brake pedal
down, pull up on the rear brake lock
lever (1).
NOTE:
The rear brake lock will not be applied
*
if the rear brake is not adjusted prop-
erly (page 15).
To release the brake lock:
1. Depress and hold the rear brake pedal.
2. Pull the lock lever down.
CAUTION :
* Before riding, make sure that the rear
brake is released fully and does not
drag.
<Release>
27