NETGEAR N150 User Manual page 17

I cannot connect to a wireless network.
Make sure that your wireless-N USB adapter is inserted securely into the USB port on
•
your computer or the USB cable if you are using it. The wireless-N USB adapter LED
should light up or blink (see
Click the icon to open NETGEAR Genie. The home screen shows the following
•
screen if the adapter cannot connect to the network that you selected.
If the network uses wireless security, you need to either know the wireless security
•
settings or use Push 'N' Connect if the network supports WPS. Some networks also
restrict use to only computers or wireless devices with known MAC addresses. If that is
the case, on the NETGEAR Genie screen, click Other to find the MAC address for your
wireless-N USB adapter and provide it to the network administrator.
NETGEAR N150 Wireless USB Adapter WNA1100
on page 6 for details).
Status LED
Maintenance
17