Switching Off Memory Security; Delayed Batch Transmission (Not Available For Colour Faxes) - Brother MFC-4820C User Manual

Switching OFF Memory Security

1
When Memory Security is switched
ON, press
2
Enter a 4-digit password and press
Menu/Set
The screen displays ACCEPTED, then after 2 seconds the
display reverts to normal. Memory Security is now switched
OFF.
If the password you enter at Step 2 is incorrect, the screen
would display WRONG PASSWORD. After 2 seconds the display
will then return to displaying SECURE MODE. You must then start
from Step 1 to switch OFF Memory Security.
If you forget the Memory Security password, please contact your
Brother dealer for service or the help number given with the warranty
documentation.
Delayed Batch Transmission
(Not available for colour faxes)
Before sending the delayed faxes, your MFC will economize by
sorting all the documents in the memory by destination and
scheduled time. All delayed faxes that are scheduled to be sent at
the same time to the same fax number will be sent as one fax.
1
Menu/Set
Press
2
Press
Menu/Set
Press
3
Stop/Exit
Press
Menu/Set
.
.
2 2 4
, , , .
to select ON (or OFF).
.
.
MEM SECURITY
PASSWORD:XXXX
SETUP SEND
4.BATCH TX
SETUP SEND 6 - 23