Customer Service - AEG SANTO Operating Instructions Manual

• Condenser
The condenser normally has the form of a grid. The refrigerant
compressed in the compressor is liquefied in the condenser. During
this process, heat is released to the surrounding air at the surface of
the condenser. The condenser is mounted on the base of the
appliance.

Customer Service

If you cannot find the remedy for a malfunction in these operating
instructions, please contact your dealer or our customer service depart-
ment. Addresses and telephone numbers are listed in the accompanying
booklet "Guarantee Conditions/Customer Service Locations".
Selective ordering of replacement parts can save unnecessary travel
and costs. For this reason always provide the following appliance infor-
mation:
This information can be found on the rating plate in the interior at the
• Model Name
• Model Number (PNC)
• Serial Number (S-No.)
left of the appliance. We recommend that you enter this information
here, so that it is handy if needed.
Note: The customer bears the costs of unjustified customer service
calls even during the guarantee period.
818 18 88-00/2
39