Changing The Light Bulb - AEG 570 D Operating And Installation Manual

Warning
• Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from
the main supply.
• Unlock the lamp cover by twisting
the bolts to the left and fold down
the bulb cover.
• Replace the old bulb with a new
one of the same type.
• Close the bulb cover and relock it
by twisting the bolts to the right.
• If the light does not come on, make
sure the bulb has been inserted
correctly before contacting your
local Service Force Centre.
10
Fig. 6