AEG 65320 K User Instructions
AEG 65320 K User Instructions

AEG 65320 K User Instructions

Ceramic glass hob
Hide thumbs Also See for 65320 K:

Advertisement

Quick Links

65320 K
Ceramic Glass Hob
User Instructions

Advertisement

Table of Contents
loading

Summary of Contents for AEG 65320 K

  • Page 1 65320 K Ceramic Glass Hob User Instructions...
  • Page 2: Dear Customer

    “What to do, if...“ section. If you require further assistance please contact your local AEG Service Force Centre, see the section “Service and Spare Parts“ Printed on paper manufactured with environmentally sound processes.
  • Page 3: Table Of Contents

    The Key Features of Your Appliance ......Appliance Description 65320 K ....... . . 10 Control panel 65320 K .
  • Page 4 Contents Cleaning and Care ..........25 Ceramic glass cooking surface .
  • Page 5: Operating Instructions

    Improper repairs can cause injury or significant mal- function. If your appliance needs repairing, please contact your local AEG Service Force Centre. • If your appliance malfunctions, or fractures, cracks or splits appear: – switch off all cooking zones, –...
  • Page 6: Safety When Cleaning

    Safety Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Your Appliance •...
  • Page 7: Disposal

    Disposal Disposal Disposing of packaging material All materials used can be recycled. The plastics are marked as follows: • >PE< for polyethylene, e.g. as used for the outer wrapping and the bags inside. • >PS< for polystyrene foam, e.g. as used for the packing pieces, com- pletely free of CFCs.
  • Page 8: The Key Features Of Your Appliance

    The Key Features of Your Appliance The Key Features of Your Appliance • Ceramic glass Cooking Surface: the appliance has a VITRAMIC® cooking surface made of glass ceramic and 4 fast heating cooking zones. The particularly powerful radiant heater elements significantly shorten the amount of time taken for the zones to heat up.
  • Page 9 The Key Features of Your Appliance • Timer: all four rings can be automatically switched off using the integrated timer. When the end of the cooking time has been reached, the cooking zone switches off.
  • Page 10: Appliance Description 65320 K

    Appliance Description 65320 K Appliance Description 65320 K Cooking zone dimensions: rear left: 145 mm rear right: 170/265 mm front left: 120/170/210 mm front right: 145 mm...
  • Page 11: Control Panel 65320 K

    Appliance Description 65320 K Control panel 65320 K Mains “On/Off“ button n For switching on the appliance. The appliance is –switched on when the button is touched for approx. one second, –switched off when the button is touched again for one second.
  • Page 12: Heat Setting Selection + And

    Appliance Description 65320 K Heat setting selection + and - For setting and adjusting the heat setting (! to )) for the selected cooking zone, or when in timer mode, to set or change the required cooking time. –The heat setting or the cooking time is increased using the + but- ton and the automatic warm up function activated.
  • Page 13: Automatic Pan Sensing

    Cooking zone safety switch Automatic pan sensing Pan and triple ring sensing is automatically activated when the cooking zone is switched on. If a cooking zone button is pressed, but there is not a suitable pan on the cooking zone, or the pan is too small, f (Fault) appears in the dis- play.
  • Page 14: Before Using For The First Time

    Before Using for the First Time Before Using for the First Time Cleaning for the first time Wipe the ceramic glass cooking surface with a damp cloth to remove any traces left from manufacturing. Important: Do not use any caustic, abrasive cleaners! The surface could be damaged.
  • Page 15: Cooking With The Automatic Warm Up Function

    Operation of the Cooking Surface Cooking with the automatic warm up function All four rings on the cooking surface have nine heat settings and are equipped with an automatic warm up function. –!, lowest heat setting –), highest heat setting –a, automatic warm up function.
  • Page 16: Cooking Without The Automatic Warm Up Function

    Operation of the Cooking Surface If you select a higher setting when the automatic function is in opera- tion, e.g. from § to %, the previous warm up time is taken into account. If you select a lower setting, then the automatic warm up function is brought to an immediate end.
  • Page 17: Locking/Unlocking The Control Panel

    Operation of the Cooking Surface Locking/unlocking the control panel At any time during the cooking process, the control panel can be locked, with the exception of the “On/Off“ button. By this means acci- dental changes to the settings can be prevented. This function is also useful as a child safety measure.
  • Page 18: Timer Function

    Operation of the Cooking Surface Timer function Setting/changing the cooking time 1.Select the desired cooking zone using the cooking zone selection but- tons and set the desired heat setting. 2. Press the “Timer“ button to activate the timer function for this cooking zone.
  • Page 19: Ending The Timer Function Early

    Operation of the Cooking Surface Ending the timer function early There are two ways of switching off the timer early: Switching off the cooking zone and timer simultaneously 1.Select the desired cooking zone using the cooking zone buttons. If the selected cooking zone is in timer mode (TIMER indicator illumi- nated), the remaining cooking time appears in the timer display field.
  • Page 20: Automatic Pan And Triple Ring Sensing

    Operation of the Cooking Surface Automatic pan and triple ring sensing Pan and triple ring sensing is automatically activated when the cooking zone is switched on. Electronic sensors are fitted under the cooking zones. These detect: –the material that the pan is made of, –the size of the base of the pan.
  • Page 21 Operation of the Cooking Surface Switching on and off the triple ring or casserole zone (when pan and triple ring sensing is switched off): 1. Select the cooking zone using the appropriate cooking zone selection button and set the desired heat setting. 2.
  • Page 22: Tables And Tips

    Tables and Tips Tables and Tips Pans The better the pan, the better the results. • You can recognise good quality pans by the base of the pan. • The base should be as thick and flat as possible. Rough bases (e.g. on cast iron pans) will scratch the cooking surface when slid.
  • Page 23: Tips For Cooking With And Without The Automatic Warm Up Function

    Tables and Tips You will waste energy if the..Pan is too small Pan lid is not Pan base is Pan is too large fitted properly uneven (glass ceramic) Tips for cooking with and without the automatic warm up function The automatic warm up function is suitable for: •...
  • Page 24: Typical Heat Settings

    Tables and Tips Typical Heat Settings The figures given in the following tables are for guidance only. Exactly which heat setting needs to be used depends on the quality of the pans and the type and quantity of the food. Table: Cooking and Frying Automatic Warm Up...
  • Page 25: Cleaning And Care

    Cleaning and Care Cleaning and Care Ceramic glass cooking surface It is important to clean the cooking surface after each use! Important! Never use aggressive cleaners such as, for example, coarse scouring cleaners or pan cleaners that scratch. 1. Always clean the cooking surface after each use. Use a damp cloth and a little washing up liquid.
  • Page 26: Stubborn Soilage

    Cleaning and Care Stubborn Soilage Residues from food that has boiled over First soften these using a wet cloth and then remove residues using a glass scraper. Caution! Take care when using a glass scraper! Then clean the cooking surface with the recommended cleaners.
  • Page 27 Important! If aggressive cleaners or pans with abrasive bases are used, then the decor will take on an abraded appearance and dark spots will appear over time. You can obtain suitable cleaners and polishes as well as glass scrapers from AEG Service Force Centre.
  • Page 28: What To Do If

    Warning! Repairs to the appliance should only be carried out by approved service engineers. Improper repairs can cause injury or mal- function. If your appliance needs repairing, please contact your local AEG Service Force Centre. What to do if ..the cooking zones do not work? Check whether –the mains fuse (fuse box) is intact.
  • Page 29 Check whether –the cooking zone was only used for a short period and is therefore not hot enough. If the cooking zone is hot, call AEG customer service..a cooking zone cannot be switched off? Check whether –the touch switches are partially covered by a damp cloth or liquid.
  • Page 30 ..f is shown in the display? Check whether –a pan that is too small is on the cooking zone. –the cooking zone has been overheated. If a cooking zone button is pressed and the pan on the cooking zone is too small, f (Fault) appears in the display.
  • Page 31: Service And Spare Parts

    Faults“ has been read, as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Customer Care For general enquiries concerning your AEG appliance or for further information on AEG products please contact our Customer Care Department by letter or telephone as follows:...
  • Page 32: Guarantee Conditions

    3. Should guarantee repairs be necessary the purchaser must inform the nearest customer service office (manufacturer´s service or authorised agent). AEG reserves the right to stipulate the place of the repair (i. e. the customer´s home, place of installation or AEG workshop).
  • Page 33: Installation Instructions

    Technical Data INSTALLATION INSTRUCTIONS Important! This appliance must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Technical Data Appliance Dimensions Width 570 mm...
  • Page 34: Regulations, Standards, Directives

    Regulations, Standards, Directives Regulations, Standards, Directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in respect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in respect of properties of electrical cookers for the household.
  • Page 35: Installing And Connecting Up

    Installing and Connecting Up Installing and Connecting Up Installing Important: The new appliance is only to be installed and connected up by an approved installer. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. The veneer or plastic coverings on kitchen units around the appliance must be bonded with heat resistant adhesive (100 °C).
  • Page 36 Installing and Connecting Up The separation between the hob and the extractor hood must be at least as large as that given in the extractor hood installation instruc- tions.
  • Page 37 Installing and Connecting Up min. 25 mm min. 5 mm • On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout. • On natural stone, synthetic stone, or ceramic surfaces, the snap- action springs can be bonded in place.
  • Page 38: Electrical Connection

    Attention! Only the cable fitted to the cooking surface recess may be used for connecting up the appliance. Replacement cables can only be obtained from AEG Service Force Centres. Part No. 374 349 000. A device is to be included in the electrical installation that makes it possible to isolate the appliance from the mains supply with a mini- mum contact separation of 3 mm.
  • Page 40 Hier Typschild aufkleben! (nur für Werk) AEG Hausgeräte GmbH Postfach 1036 D-90327 Nuremburg http://www.aeg.hausgeraete.de © Copyright by AEG ANC 822 947 296 - 05 - 0500...

Table of Contents