Table of Contents
Advertisement
12 electrolux
Using the hob with activated locking
function
Even if the function lock is activated, the hob
can be used, but the next time that the hob
is switched on, the function lock is again ac-
tivated.
1. Switch on the cooking zones. If the func-
tion lock is activated, this is shown:
~ 2 sec.
2. Press at the same time on two optional
areas for the heating positions and for
about 1 second
A signal sounds as confirmation. The cook-
ing zones and settings can be set as usual
until the hob is switched off again.
Disengaging the function lock
1. Switch on the cooking zones If the func-
tion lock is activated, this is shown .
~ 2 sec.
2. Press the area "Function lock" for about
3 seconds .
A signal sounds as confirmation.
and
.
3. Press an optional heating setting
The display goes out and the function
lock is disengaged. The hob is automati-
cally switched off after a few seconds.
The Timer
The Timer can be used in two ways:
• as an Automatic safety switchoff. A
cooking time is set as for a cooking zone
and after a time the cooking zone is
switched off automatically. This function
can be used for several cooking zones at
the same time.
• as a Signal clock (egg-timer). An acous-
tic signal is heard when the set time ex-
pires.
The timer can be used as a signal clock when
no cooking zone is switched on.
Automatic safety switch-off
The cooking zones in which you want to use
automatic safety switch-off must be turned
on.
1. Choose the zone for which automatic
switch-off is to be set with the area Timer
.
Press a few times on the area Timer
and the first active cooking zone is selec-
ted according to the clock and the asso-
ciated control lamp flashes rapidly. For
example the left-hand rear control lamp
for the lefthand rear cooking zone. The
Timer display shows
~ 3 sec.
.
.
Advertisement
Table of Contents
