Honda 08B26-SDA-100A Installation Instructions Manual page 6

13. Remove the center console box inner cover (one
self-tapping screw and release one retaining tab,
and two hooks).
With Accessory Socket
RETAINING
TAB
SELF-TAPPING
SCREW
(Reuse.)
CENTER CONSOLE BOX
INNER COVER
(Without accessory
socket)
6 of 13
CENTER CONSOLE
BOX INNER COVER
HOOK
HOOK
SELF-
TAPPING
SCREW
(Reuse.)
RETAINING
TAB
CENTER
2221020K
CONSOLE BOX
Installing the CD Changer
14. Visually check the position of the spring adjusting
slots on both sides of the CD changer. If both of
the spring adjusting slots are not in the vertical
(V) position, move the slots to the vertical position
using a small flat-tip screwdriver.
(H: Horizontal)
15. If the vehicle is equipped with an in-dash 6-disc
CD Changer, use a pin to move the number 2
switch to the "ON" position.
AII 30200(0508)
(V: Vertical)
SPRING
ADJUSTING
SLOTS (2)
SWITCH
Move to the
"ON" position.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.